FlowSys
Third Generation Continuous Flow Analyzer
The FlowSys continuous flow analyzer offers high performance, low running costs, and a user-friendly interface.
-
Up to 90 analyses per hour
-
Fully automated – Simply program your worklist and walk away.
-
Export Results to Excel, LIMS or shared drive
-
Easy to use – No scientific background required
Easy Operation
Daily operation of the FlowSys is simple. Worklists can be programmed in under 5 minutes.
Simply enter your sample information and select which chemistries you would like applied to each. Press play and the FlowSys will run unattended.
The graphical interface will let you observe the reaction dynamics in real time.
High Throughput
The FlowSys can be configured with a 104 or 200 position autosampler.
This high sample capacity and high-throughput make it an ideal solution for labs with large testing volumes.
Multiple Channel Configuration
Operators that are testing for multiple parameters can configure the FlowSys with multiple manifolds dedicated to a variety of parameters.
This design optimizes throughput and allows for flexibility in testing options.
FlowSys manifolds can be configured to automate sample preparation including digestions and distillations making it an ideal solutions for:
-
TKN
-
Ammonia
-
Phenols
-
Cyanide
Calibration Curves
Calibrations curves can be generated from a prepared standard. The FlowSys can auto-dilute based on a preprogrammed concentration to ensure your results.
All calibration information is automatically saved for traceability and can be exported into reports for auditing purposes.
Every FlowSys channel comes standard with integrated software and a touch screen.
This allows channels to operate without an external PC. The operator is guided through a simplified menu to the calibration procedure and the sample analysis.
Preprogrammed Methods
The Flowsys is preprogammed with EPA approved methods for a variety of sample types including wastewater, fresh water, seawater, brackish water, soils, and plant tissues.
A listing of the most common parameters can be found below.
Surface, Ground, Drinking, Waste & Seawater
Aldehydes
Alkalinity
Aluminum
Calcium
Chlorides
Chlorine
Chromium 6
COD
Cyanide Free + Total
Fluoride
Hardness
Iron
Manganese
Nitrate + Nitrite
Nitrite
Permanganate Index
Phenols
Phosphate
Silicate
Sulfate
Sulfide
Total Nitrogen
Total Phosphorous
Soils, Plants, Feeds and Fertilizers
Copper as Cu(I+II)- Acid-extractable
Nitrate as N-NO3 – CaCl2 extractable
Total Phosphorus as P – Kjeldahl
Iron as Fe(II+III)- Acid-extractable
Phosphorus as P-PO4 -CaCl2 extractable
Magnesium as Mg(II)
P (BSES-P) as P-PO4 -Acid extractable
Silicon as Si – CaCl2 extractable
Phosphorus as P-PO4–Olsen extractable
Silicon as Si – Acid extractable
Sulphate as SO42- – CaCl2 extractable
Phosphorus as P-PO4 – Sorption
Zinc as Zn(II)- Acid extractable
Calcium as Ca(II)
Total Kjeldahl Nitrogen as N-NH3
Phosphorus (Bray) as P-PO4 – Available
Colwell-extractable P as P-PO4
Total Protein Ammonia as N-NH3- CaCl2 extractable
Ammonia as N-NH3 – KCl extractable
Chloride as Cl- – Water extractable
Boron as B(III) -CaCl2 extractable
Nitrate as N-NO3 – KCl extractable
Nitrate as N-NO3 – Water extractable
Features and Benefits
- Color touch-screen
- Baseline and gain PC controlled
- HB temperature PC controlled
- Dual-sped pump PC controlled, for quick set-up and shut down
- PC controlled Wash/Reagents valves
- Automatic colorimeter adjust on all filters
- Random access Automatic Sampler, with 104 positions on single sampling probe, or 52 positions on dual probe sampling
- Autodiluter option
- Low reagents consumption & low cost for reagents disposal
- Special pump design/new manifold connectors
- Low maintenance cost
- Easier and friendly approach, no problems from bubble pattern, tubes connections etc.
- Easy & Fast method changeover
- Fast shutdown and Start up
- Independent analytical module
- Pump/s activated only for running channel/s
- Pump tubes saving.